Home | Hardside Water Mattresses | Soft Side Water Mattresses | Heaters | Rails | Tubes | Sheets | Air Mattresses | Mattress Pads | Pump | FAQ's | Site Map
Use our secure online order system to purchase a
 |
Does your waterbed look like the picture above? If it does, you have what is known as a softside waterbed. Softside water beds look just like a conventional box spring and mattress but, if you unzip or flip off the quilted top, you will find a waterbed bladder or set of water tubes sitting inside of a foam perimeter. The foam perimeter of the soft side waterbed is known as foam rails. There should be a vinyl safety liner covering the foam rails and you may or may not have a heater under the safety liner. Some soft side water beds have heaters and some do not. If there is a lot of padding in the form of a foam pad under the quilted top, or a very thick pillow top, a heater will not be necessary and you probably wouldn't even feel the heat if you had one. Because softside waterbeds usually have less water depth than hardside waterbeds, if you use a waterbed heater, you will need to use a low watt waterbed heater. We offer low watt water bed heaters and softside waterbed liners below.
|
Softside Waterbed Liner
Soft Side Safety Liner for Straight Wall Beds
Softside Safety Liner for Slanted Wall Beds
|
Slanted Wall Mid-Fill Softside Bed Liner
Sofside waterbed liner to fit a mid-fill softside bed within the following dimensions with foam rails that are slanted:
A. 5" - 6"
B. 3 1/2" - 4 1/2"
C. 5 1/2" - 6 1/2"
D. Twin: 21 1/2" - 24 1/2" Width X 58 1/2" - 61 1/2" Length
Double: 36 1/2" - 39 1/2" Width X 58 1/2" - 61 1/2" Length
Queen: 44 1/2" - 47 1/2" Width X 64 1/2" - 67 12" Length
Eastern King: 60 1/2" - 63 1/2" Width X 64 1/2" - 67 1/2" Length
California King: 56 1/2" - 59 1/2" Width X 68 1/2" - 71 1/2" Length
| Mid-Fill,
Slanted Wall Softside Waterbed Liner
Twin |
Slanted Wall Deep-Fill Softside Bed Liner
Sofside waterbed liner to fit a deep-fill softside bed within the following dimensions with foam rails that are slanted:
A. 7" - 8"
B. 3" - 4"
C. 8" - 9"
D. Twin: 23 1/2" - 26 1/2" Width X 59 1/2" - 62 1/2" Length
Double: 38 1/2" - 41 1/2" Width X 59 1/2" - 62 1/2" Length
Queen: 44 1/2" - 47 1/2" Width X 64 1/2" - 67 12" Length
Eastern King: 62 1/2" - 65 1/2" Width X 64 1/2" - 67 1/2" Length
California King: 56 1/2" - 59 1/2" Width X 68 1/2" - 71 1/2" Length
| Deep-Fill,
Slanted Wall Softside Waterbed Liner
Twin |
Slanted Wall Extra Deep-Fill Softside Bed Liner
Sofside waterbed liner to fit an extra deep-fill softside bed within the following dimensions with foam rails that are slanted:
A. 8" - 9"
B. 2 1/2" - 3 1/2"
C. 9" - 10"
D. Twin: 22 1/2" - 25 1/2" Width X 59 1/2" - 62 1/2" Length
Double: 37 1/2" - 40 1/2" Width X 59 1/2" - 62 1/2" Length
Queen: 44 1/2" - 47 1/2" Width X 64 1/2" - 67 12" Length
Eastern King: 62 1/2" - 65 1/2" Width X 64 1/2" - 67 1/2" Length
California King: 56 1/2" - 59 1/2" Width X 68 1/2" - 71 1/2" Length
| Extra
Deep-Fill, Slanted Wall Softside Waterbed Liner
Twin |
The heater listed below is designed to be used with a soft sided waterbed or a shallow fill waterbed (less than 7 1/2" water depth. If you have a wood framed or deep fill waterbed, you will find full watt waterbed heaters here.
|
 | |
|
Home | Hardside Water Mattresses | Soft Side Water Mattresses | Heaters | Rails | Tubes | Sheets | Air Mattresses | Mattress Pads | Pump | FAQ's | Site Map
NOTE: No part of this page may be used in any form for commercial purposes without prior written permission of the webmaster. Making copies of any part of this page, other than for your own personal use is a violation of United States copyright laws.
